How To Use A Swamp Cooler?

Evaporative cooling is one way to save electricity during the summer when the temperatures rise and your AC can’t keep pace. Swamp Cooler, a popular name for an evaporative-style cooling system, is also available. There are swamp coolers large enough for cooling an entire home, and smaller portable swamp coolers which can cool one room at a time. To beat the heat inside your tent, there are swamp coolers that can be taken on camping trips.

This all sounds amazing, right? Understanding how does a swamp cooler work is important before you install one in your living space or campsite. Swamp coolers work differently from regular AC units.

How Do Swamp Coolers Work?

The very first thing you need to know is that swamp coolers are not like regular AC. Normal ACs consume a lot of electricity to cool your air. Swamp coolers use pure cooling power from evaporation. Swamp coolers don’t even need to run a fan. However, the fan helps to circulate now-cooled air.

The same way that sweat cools down your skin is how a swamp more fantastic functions. Water evaporates into the atmosphere. It removes heat from the air and replaces it with aerated water droplets. The cooling pad is soaked in water and then dried by evaporation. The cooling process cools down the air around the swamp cooler. A small fan can circulate that cool air.

How To Use A Swamp Cooler?

Let’s get on to what you came here for a brief and comprehensive guide on how to make your swamp cooler work.

Fill The Tank/Reservoir With Cool Tap Water

Begin by filling up the tank of the evaporative cooling system. You can either camp or use the cooler to cool you on your couch. But, it won’t work if there isn’t enough water to absorb and evaporate. It is best to use 50-degree water from the tap. This cool water will evaporate, cooling the swamp cooler further.

Let The Pads Soak Up Water

When the reservoir is full allow your swamp cooler to soak up any water before you turn on the fan. This is how your cooler works. The reservoir’s pads absorb moisture and act as fins to cool the air. You are just blowing around hot gas if the pads aren’t fully dried out and moistened.

Priming The Pads

Swamp cooler users swear by priming their pads. You can do this by pouring water over the pads at the beginning and end of the cooling session. Priming the pads helps to make sure they are initially moistened so that evaporation can occur.

Point The Fan For A Higher Effect

While they may not be as powerful or as efficient as their electricity-hungry counterparts but they can make your body feel much cooler if used properly. Your swamp cooler can be optimized by pointing it precisely where you want the cooling to occur.

Consider Cracking Your Windows

The difference between AC and swamp coolers is that swamp coolers can work better when you open the windows. Humidity is again the reason. If the cooler is efficient, it will place a substantial amount of cool moist air into the air. This will increase humidity and lower the cooler’s efficiency. If you want to keep swamp cooler cool, open a window to let in the humidity and create dry air for the cooler.

Pair With A Dehumidifier During Humid Days

You can also use a dehumidifier if it is too hot to put the windows open or if you are experiencing burning, muggy summers. Dehumidifiers operate in the same way as swamp coolers. They remove water moisture from the air, and gradually fill a reservoir that will eventually need to be empty. The dehumidifier blows out dry air in a steady stream and lowers humidity.

Leave a Reply

Your email address will not be published. Required fields are marked *